WL510 Discovery Tool V2 3 Zip

irfaan.khodabukus@digitalyacht.co.uk2026-06-29T20:39:12+00:00Tool to discover WL510 units after a reset or if badly configured (requires Java JRE to be installed)

Teraterm 4 90 Zip

irfaan.khodabukus@digitalyacht.co.uk2026-06-29T20:39:12+00:00Extremely useful Terminal Program that we use a lot for configuring and testing devices

AISNode+AISNet Firmware V01 50 Zip

irfaan.khodabukus@digitalyacht.co.uk2026-06-29T20:39:12+00:00Latest Receiver Firmware Update for AISNode and AISNet (units sold since Sept 2015)

AIT250+1000 Firmware 10 11 14 0 Zip

irfaan.khodabukus@digitalyacht.co.uk2026-06-29T20:39:12+00:00Final firmware update for our legacy Transponders AIT250 + AIT1000

IKommunicate Firmware 2017042100 Zip

irfaan.khodabukus@digitalyacht.co.uk2026-06-29T20:39:12+00:00Latest iKommunicate firmware update (21st April 2017)

IKommunicate SD Card V2 00 Zip

irfaan.khodabukus@digitalyacht.co.uk2026-06-29T20:39:12+00:00iKommunicate SD Card image including 21st April 2017 Firmware Update

configAIS for Windows ZIP

irfaan.khodabukus@digitalyacht.co.uk2026-06-29T20:39:12+00:00configAIS for Windows, the configuration and diagnostics software for our Class A transponders

WL510 Latest Firmware V5.5.8

irfaan.khodabukus@digitalyacht.co.uk2026-06-29T20:39:12+00:00This is the latest version of our WL510 firmware. Do not update your unit unless expressly told to by Digital Yacht, as some older units will not work with this latest firmware or will need to be fully re-configured.

4GConnect Original Web Interface Firmware V01.14.05

irfaan.khodabukus@digitalyacht.co.uk2026-06-29T20:39:12+00:00This was the last firmware update for our 4GConnect products that featured the original web interface and is common across all variants. This is an important update for any users that wish to upgrade to the new user interface or for US customers that are...

WLN10SM Firmware V1.43

irfaan.khodabukus@digitalyacht.co.uk2026-06-29T20:39:12+00:00Latest firmware for our new WLN10SM Smart Wireless NMEA Server (not suitable for WLN10 or WLN10HS units). Update the firmware via the WLN10SM web interface and once successfully updated, press and hold the reset switch for >10 seconds to restore to factory defaults.