USD 
DiGAToN
From: US $5,100.00
“AtoNs fit to marine structures, hazards, buoys or can be configured to represent a virtual or synthetic point if mounted remotely from a physical location. AIS equipped vessels and shore stations can then not only identify the position of these marks but also read data
KEY FEATURES
DigAtoN is an AIS AtoNs. It fit to marine structures, hazards, buoys or can be configured to represent a virtual or synthetic point if mounted remotely from a physical location. AIS equipped vessels and shore stations can then not only identify the position of these marks but also read data (such as weather and instruments) collected by the AtoN.
The DigAtoN is available as a Class 1 device (transmit only) or a Class 3 device (transmit and receive). Class 1 devices require a local AIS base station to be operating in the same area as the AtoN whereas Class 3 devices can internally allocate slots for transmission allowing them to be placed anywhere. Class 3 devices can also be configured and queried remotely and wirelessly “chained” together for extended range configuration.
DigAtoN products are also available with an additional sensor interface installed to allow extended monitoring and digital switching capability.
You can download a full presentation of DigAtoN by clicking here.
APPLICATION
- Marking offshore structures, wind farms, wrecks, points of interest or danger areas
- Transfer of local meteorological conditions such as wind, pressure, wave height
- Custom data transmission to base stations such as electrical status, tide, current, salinity etc measurements
- Localised tide and current information
- Use virtual or synthetic AtoN capability to mark 5 virtual points (ideal for yacht club racing or movable marks)
SPECIFICATIONS
- Available as a Class 1 or Class 3 device
- Ultra tough and waterproof to IPX7
- Approved for global use
- Internal GPS sensor and external antenna option available with best in class power consumption (important for self powered structures)
- Class 3 devices support chaining and remote (VDL – AIS VHF-FM Data Link) configuration and monitoring
- Virtual and synthetic capability (up to 5)
- Adjustable transmit power (1 to 12.5W)
- Highly configurable for all AtoN applications with full range of interface solutions from Digital DeepSea
- The version with sensor interface feature extended I/O capability :
Current sense; Three non-isolated analogue inputs and two isolated analogue inputs; 5 isolated digital I/Os and 5 non-isolated digital I/Os; Two RS232 ports and a fully isolated RS422/NMEA port; Two relay drive outputs; SDI-12 serial bus; Input voltage monitor (no external connection required)
| Weight | 1.3 kg |
|---|---|
| Type | Class 1 AtoN, Class 1 AtoN with sensor interface, Class 3 AtoN, Class 3 AtoN with sensor interface |
Related products
- Read more
MOB100
“The AIS MOB100 is an ultra compact AIS MOB beacon/SART. Its designed for manual or auto activation from a lifejacket and when triggered will send the casualty position 8 times a minute to any AIS equipped vessels or shore stations. Range is typically 5-10NM.”
- Select options
AIS Transponder with Alarms, VHF Splitter, WiFi & NMEA2000
From: US $1,420.00“The perfect all-into-one pack to receive AIS and to transmit your position as well as streaming wirelessly all your navigation data on navigation apps & software. This pack also includes AIS alarms and a ZeroLoss VHF splitter.”
- Add to cart
AIS Deploy
US $4,295.00 Price incl. VAT: US $5,154.00“AIS Deploy is a portable, self contained, highly rugged Class A AIS transponder system supplied with GPS and VHF antennas and an integrated 12v DC rechargeable battery. In addition to the Class A dedicated controller (MKD), it features a wireless interface to allow tablets and iPads to display data on a wide range of compatible apps.”
