English
French
Spainsh“AtoNs fit to marine structures, hazards, buoys or can be configured to represent a virtual or synthetic point if mounted remotely from a physical location. AIS equipped vessels and shore stations can then not only identify the position of these marks but also read data
DiGAToN
Contact us for quote
KEY FEATURES
DigAtoN is an AIS AtoNs. It fit to marine structures, hazards, buoys or can be configured to represent a virtual or synthetic point if mounted remotely from a physical location. AIS equipped vessels and shore stations can then not only identify the position of these marks but also read data (such as weather and instruments) collected by the AtoN.
The DigAtoN is available as a Class 1 device (transmit only) or a Class 3 device (transmit and receive). Class 1 devices require a local AIS base station to be operating in the same area as the AtoN whereas Class 3 devices can internally allocate slots for transmission allowing them to be placed anywhere. Class 3 devices can also be configured and queried remotely and wirelessly “chained” together for extended range configuration.
DigAtoN products are also available with an additional sensor interface installed to allow extended monitoring and digital switching capability.
You can download a full presentation of DigAtoN by clicking here.
APPLICATION
- Marking offshore structures, wind farms, wrecks, points of interest or danger areas
- Transfer of local meteorological conditions such as wind, pressure, wave height
- Custom data transmission to base stations such as electrical status, tide, current, salinity etc measurements
- Localised tide and current information
- Use virtual or synthetic AtoN capability to mark 5 virtual points (ideal for yacht club racing or movable marks)
SPECIFICATIONS
- Available as a Class 1 or Class 3 device
- Ultra tough and waterproof to IPX7
- Approved for global use
- Internal GPS sensor and external antenna option available with best in class power consumption (important for self powered structures)
- Class 3 devices support chaining and remote (VDL – AIS VHF-FM Data Link) configuration and monitoring
- Virtual and synthetic capability (up to 5)
- Adjustable transmit power (1 to 12.5W)
- Highly configurable for all AtoN applications with full range of interface solutions from Digital DeepSea
- The version with sensor interface feature extended I/O capability :
Current sense; Three non-isolated analogue inputs and two isolated analogue inputs; 5 isolated digital I/Os and 5 non-isolated digital I/Os; Two RS232 ports and a fully isolated RS422/NMEA port; Two relay drive outputs; SDI-12 serial bus; Input voltage monitor (no external connection required)
| Weight | 1.3 g |
|---|---|
| Type | Class 1 AtoN, Class 1 AtoN with sensor interface, Class 3 AtoN, Class 3 AtoN with sensor interface |
Related products
-
AISNet AIS Base Station
$949.95 -
S1000
$799.95 -
AIS Deploy
$4,599.95
